How to Fix “No Sound” Issues on Xbox Series X and Series S

An Xbox without sound can ruin the fun, especially when you’re ready for an epic boss fight or couch co-op session. You power on your Xbox Series X, connect your Bluetooth headphones, and everything works fine, until you try to use the menus. Frustrating, right?

But you don’t need to stress out now. This page will help you get the most out of your tech, from device protection to console repairs. Here’s what could be causing the problem and how to fix the Xbox Series X no sound issue.

Part 1. Common Causes of No Sound on Xbox Series X or S

Ever sat down for a gaming session, only to realize your Xbox Series X or S is completely silent? Before you panic, know that this issue is caused by simple and fixable problems. Here are some of the most common reasons why there’s no sound on Xbox Series X:

• Repairs Xbox gameplay videos from any source (Xbox, external drives, or after transfers to PC/Mac).
• Uses AI advanced algorithms to fix severe corruption and restore Xbox Series X and Series S gameplay detail.
• Handles MP4, MOV, AVI, MKV, and many more formats used in Xbox captures.
• Fixes Xbox Series X/S gameplay videos that won’t open, have no sound, are out of sync, pixelated, lagging, flickering, or show black screens.
• Keeps the Xbox gameplay original quality and can enhance up to 4K/8K HDR.
• Fix multiple Xbox Series X and Series S gameplay videos at once.
• Repairit proudly leaves its legacy of reliable repairs with its high success rate (99.5%).

Part 2. 3 Quick Fixes to Restore the “No Sound on Xbox Series X”

Nothing kills the thrill of gaming faster than firing up your Xbox Series X only to realize there’s no sound. Most of the time, it’s not a big hardware issue but a simple setting or connection problem. Try the three quick fixes below to get your sound back.

Check Volume & Mute Settings

Sometimes the quickest solution is the one we overlook. If your Xbox Series X has no sound, start by checking your TV or monitor’s volume level and making sure it’s not muted. Also, confirm that your Xbox controller’s headset or chat settings aren’t lowering or blocking game audio.

Step 1: Use your remote to check if your TV is muted. Confirm the volume is up.

Step 2: Make sure your TV is set to the correct speaker or audio output in its settings.

Step 3: Test the built-in or external speakers by switching channels or playing a video. Connect another device if needed for confirmation.

Inspect HDMI Connection

If your console is linked to a TV speaker system, the HDMI cable could be the source of the problem. To test the HDMI connection:

Step 1: Press the Xbox button. Find Profile & system and press Settings.

Step 2: Under General, find TV & display options and choose Video fidelity & overscan.

Step 3: Under Display, select HDMI.

This sends Xbox audio through HDMI. If the HDMI cable functions great elsewhere, your Xbox or TV may be the primary issue. To test it, unplug it from both ends. Examine your HDMI cable for any visible damage, bends, or blockages. Disconnect it from both your TV and console, and utilize compressed air to remove dust in the ports.

If the problem persists, try using a different HDMI port or cable to rule out damage.

Check Audio Output Settings on Xbox

Incorrect audio settings can stop sound from playing altogether. Head to your Xbox Series X settings and review your audio output options. Ensure the selected format matches your TV, monitor, or sound system for clear, uninterrupted audio.

Here are the directions to follow:

Step 1: Press the Xbox button on your controller and select the Speaker icon.

Step 2: Plug your headphones and set Headset volume and Headset chat mixer to the highest levels.

Step 3: Open Settings and select General to access Volume & audio output.

Step 4: Then, review your Speaker audio and Headset format. Try switching the configuration to Mono in Audio setup.

Step 5: Use Audio testing & details to confirm if the Xbox sound works.

Note: Ensure no Bluetooth headphones are connected to your Xbox.

Part 3. 5 Advanced Fixes to Restore the “No Sound on Xbox Series X”

Still stuck with silent gameplay after trying the quick fixes? It’s time to move on to these 5 advanced methods to fully restore the no sound on Xbox Series X.

Check Headset or Controller Audio

Are you hearing static, distortion, or glitches from your Xbox headset? It could be due to damaged speakers or incorrect audio EQ (equalizer) settings, which adjust the balance between frequency components.

First, unplug your headset from the controller and move it back in securely. If it’s wireless, ensure it’s accurately paired with your Xbox.

Note: If your headset connects wirelessly through the Xbox controller, remember the controller’s auto-off feature shuts it down after 15 minutes to save battery. To prevent this issue, switch your controller to wired mode or connect it with a charging cable so you can play while it charges.

If your Xbox Series X still has no sound, try these next steps:

Step 1: Press the controller’s Xbox button.

Step 2: Look for Profile & system and select Settings.

Step 3: Pick Devices & connections and Accessories.

Step 4: Choose your headset, then hit Configure.

Step 5: Set all levels to Default in Equalizer.

Update System Software

If your headset audio keeps cutting in and out during gameplay, the problem might be outdated firmware. Old firmware can cause your controller or headset to send audio inconsistently, leading to lags and dropouts.

Step 1: In the Accessories section, choose your controller from the list.

Step 2: Select … to view the firmware version.

Step 3: Click Update now to own the recent version.

Note: Adhere with the same steps above to update your Xbox headset. But pick your headset instead of the controller itself. For other headset brands, read the user manual or manufacturer’s website for specific directions.

Still not hearing any audio from your Xbox? It’s time to get new speakers. Replace damaged headset speakers if you hear crackling sounds, especially after using high volume for long periods. This can be done by opening the ear cup, removing the damaged driver, and installing a new one.

Reset Audio Settings

Just like your controller, your Xbox console can also run into sound problems if it’s not up to date. Installing the latest system update often fixes these issues. To make it easier, turn on the “Keep my games & apps up to date” option so your progress stays safe while updates install in the background.

Here’s how:

Step 1: Access your Xbox menu Settings and select System.

Step 2: Select Updates & downloads. Allow the system to check for updates. Download and install any available updates.

Step 3: Once done, restart your Xbox and test if the sound is back.

Reset Console (Keep Games & Apps)

If you’ve tried everything else, you can reset your console without losing your games and apps. This can fix serious system problems while keeping your library safe. Some Xbox Series X users lose sound in the in-game menu after using Quick Resume, but a factory reset solves it. Here’s what to do:

Step 1: Turn on your Xbox console.

Step 2: Go to Settings, choose System, and find Console info.

Step 3: Select Reset console. When prompted, choose Reset and keep my games & apps. This refreshes the system and removes bugs without deleting your content.

Note: If the problem is caused by a corrupted game file, choose Reset and remove everything instead.

Step 4: After the reset, set up your Xbox and navigate to the in-game menu to check if the sound is working.

Repair Corrupted Xbox Series X and Series S Gameplay Videos

Recording your gameplay lets you revisit your best Xbox moments, but sometimes these files can get corrupted and won’t play. This can happen due to:

• Turning off the console or exiting a game while saving footage.
• A damaged hard drive storage or bad disk components.
• Power loss or sudden shutdowns during recording.
• Xbox or game software bugs.
• Incomplete or faulty file transfers to another device.

To fix these damaged Xbox Series X and Series S gameplay video files, you can use a trusted tool like Repairit Video Repair. It supports repairing videos from Xbox Series X/S, restoring them to a playable state without affecting quality.

Key Features:

• Repairs Xbox gameplay videos from any source (Xbox, external drives, or after transfers to PC/Mac).
• Uses AI advanced algorithms to fix severe corruption and restore Xbox Series X and Series S gameplay detail.
• Handles MP4, MOV, AVI, MKV, and many more formats used in Xbox captures.
• Fixes Xbox Series X/S gameplay videos that won’t open, have no sound, are out of sync, pixelated, lagging, flickering, or show black screens.
• Keeps the Xbox gameplay original quality and can enhance up to 4K/8K HDR.
• Fix multiple Xbox Series X and Series S gameplay videos at once.
• Repairit proudly leaves its legacy of reliable repairs with its high success rate (99.5%).

Step 1: Add your corrupted Xbox Series X and Series S gameplay videos by clicking Add video and start repairing or the Add button.

Step 2: After adding, you’ll see Xbox Series X and Series S gameplay file details (name, path, size, resolution, etc.). Now, hit Repair.

Step 3: Once done, double-click to preview the final quality. Hit Save and select your preferred folder. Avoid the original damaged file path.

Conclusion

Clear and immersive audio is key to a great gaming experience. However, the Xbox Series X no sound error is inevitable. This can be frustrating since finding the exact cause isn’t always easy. The good news is that there are several fixes you can try. If none work, your best bet may be to reach out to Microsoft for help. Also, if your Xbox gameplay video files might get corrupted, turn to Repairit Video Repair for help.