Why Does My Mavic Video Look Hazy Even on a Clear Day?

Kelly Sherawat updated Oct 20, 26

3 min(s)

If your Mavic footage stays hazy on a clear day, first check whether the haze starts in the camera view or only appears in the saved video. A lens or focus problem, incorrect exposure, or a camera-side fault should be handled before you try to enhance the finished clip.

In this Mavic camera issue from Reddit, the user described repeated loss of focus plus an overexposed, hazy-looking feed across several used Mavic Pro units. Cleaning or visually checking the lens and changing exposure did not fully remove the haze, and gimbal calibration rarely fixed the focus problem.

Check Whether the Haze Starts Before Recording

Look at a well-lit scene and compare the live view with a short test clip from the memory card. If both are hazy, inspect the lens for smudges, moisture, filters, or physical damage, then reset the camera settings. DJI's Mavic Pro guidance also notes that sharp focus requires an actual focus point; simply pushing manual focus to infinity does not guarantee a sharp image.

If the haze changes when you adjust exposure, review the exposure mode and settings before another flight. DJI's support guidance for exposure problems recommends checking camera parameters and testing Auto exposure when the image is clearly over- or underexposed.

If the Saved Video Is Playable but Still Looks Hazy

When the MP4 or MOV plays normally and the problem is mainly softness, low contrast, or weak visible detail, the issue is a quality problem in the finished footage rather than a playback failure. In that case, Wondershare Repairit AI Video Enhancer can be used to improve clarity and visible detail in a saved clip.

Enhancement can improve usable detail, but it cannot recreate highlight detail that was fully clipped during capture or correct a camera that continues to lose focus. If every new test recording is hazy, return to the camera, lens, and exposure path before processing more footage.